Configure Terminal - Cisco MDS 9124 - Fabric Switch Reference

Chapter 4 C Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

configure terminal

To enter the configuration mode, use the configure terminal command in EXEC mode.
Syntax Description
This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines
None.
Examples The following example enters the configuration mode:
switch# configure terminal
switch(config)#
The following example enters the configuration mode using an abbreviated format of the command:
switch# config terminal
switch(config)#
OL-16217-01, Cisco MDS SAN-OS Release 3.x
configure terminal
Modification
This command was introduced.
Cisco MDS 9000 Family Command Reference
configure terminal
4-111