Clear Cores - Cisco MDS 9124 - Fabric Switch Reference

clear cores

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
clear cores
To clear all core dumps for the switch, use the clear cores command in EXEC mode.
Syntax Description
This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines
The system software keeps the last few cores per service and per slot and clears all other cores present
on the active supervisor module.
Examples The following example shows how to clear all core dumps for the switch.
switch# clear cores
Related Commands Command
show cores
Cisco MDS 9000 Family Command Reference
4-32
clear cores
Modification
This command was introduced.
Description
Displays core dumps that have been made.
Chapter 4
OL-16217-01, Cisco MDS SAN-OS Release 3.x
C Commands