Fabric - Cisco MDS 9124 - Fabric Switch Reference

fabric

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
fabric
To add a fabric to the cluster, use the fabric command in the Cisco SME cluster configuration submode.
Syntax Description
fabric name
Defaults None.
Command Modes Cisco SME cluster configuration submode.
Command History Release
3.2(2)
Usage Guidelines None.
Examples The following example adds a fabric named sw-xyz to a cluster:
switch# config terminal
switch(config)# sme cluster c1
switch(config-sme-cl)# fabric sw-xyz
Related Commands Command
show sme cluster
Cisco MDS 9000 Family Command Reference
8-2
fabric fabric name
Specifies the fabric name. The maximum length is 32 characters.
Modification
This command was introduced.
Description
Displays information about Cisco SME cluster.
Chapter 8
OL-16217-01, Cisco MDS SAN-OS Release 3.x
F Commands