Isns-Server Enable - Cisco MDS 9124 - Fabric Switch Reference

isns-server enable

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
isns-server enable
To enable the Internet Storage Name Service (iSNS) server, use the isns-server enable command in
configuration mode. To disable iSNS, use the no form of the command.
Syntax Description
This command has no other arguments or keywords.
Defaults
Disabled.
Command Modes Configuration mode.
Command History Release
2.0(x)
Usage Guidelines
Performing the isns-server enable command enables the commands used to configure iSNS.
Examples
The following example shows how to enable iSNS.
switch# config terminal
switch(config)# isns-server enable
The following example shows how to disable iSNS.
switch# config terminal
switch(config)# no isns-server enable
Related Commands Command
isns distribute
isns esi retries
isns profile name
server
show isns
Cisco MDS 9000 Family Command Reference
11-120
isns-server enable
no isns-server enable
Modification
This command was introduced.
Description
Enables iSNS distributed support.
Configures ESI retry attempts.
Creates and configures iSNS profiles.
Configures iSNS server attributes.
Displays iSNS information.
Chapter 11
OL-16217-01, Cisco MDS SAN-OS Release 3.x
I Commands