Site-Id - Cisco MDS 9124 - Fabric Switch Reference

Chapter 21 S Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

site-id

To configure the site ID with the Call Home function, use the site-id command in Call Home
configuration submode. To disable this feature, use the no form of the command.
Syntax Description
site-number
Defaults None.
Command Modes
Call Home configuration submode.
Command History Release
1.0(2)
Usage Guidelines None.
Examples
The following example shows how to configure the site ID in the Call Home configuration.
switch# config terminal
Enter configuration commands, one per line.
switch(config)# callhome
switch(config-callhome)# site-id Site1ManhattanNY
Related Commands Command
callhome
callhome test
show callhome
OL-16217-01, Cisco MDS SAN-OS Release 3.x
site-id {site-number}
no site-id {site-number}
Identifies the unit to the outsourced throughput. Allows up to 256
alphanumeric characters in free format.
Modification
This command was introduced.
Description
Configures the Call Home function.
Sends a dummy test message to the configured destination(s).
Displays configured Call Home information.
End with CNTL/Z.
Cisco MDS 9000 Family Command Reference
site-id
21-31