Source - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

source

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
source
To configure a switched port analyzer (SPAN) source, use the source command in SPAN session
configuration submode. To disable this feature, use the no form of the command.
On a Cisco Fabric Switch for HP c-Class BladeSystem and on a Cisco Fabric Switch for IBM
Note
BladeCenter, the syntax differs as follows:
interface {bay port | ext port}
Syntax Description filter
vsan vsan-id
interface
fc slot/port
fcip fcip-id
fv
slot/dpp-number/fv-port
iscsi slot/port
bay port | ext port
port-channel
channel-number
sup-fc number
rx
Cisco MDS 9000 Family Command Reference
21-58
source {filter vsan vsan-id | interface {fc slot/port [rx [traffic-type {initiator | mgmt | target}] |
tx [traffic-type {initiator | mgmt | target}] | traffic-type {initiator | mgmt | target}] |
fcip fcip-id | fv slot/dpp-number/fv-port | iscsi slot/port [rx [traffic-type {initiator | mgmt |
target}] | tx [traffic-type {initiator | mgmt | target}] | traffic-type {initiator | mgmt |
target}]| port-channel channel-number [rx [traffic-type {initiator | mgmt | target}] | tx
[traffic-type {initiator | mgmt | target}] | traffic-type {initiator | mgmt | target}] | sup-fc
number [rx [traffic-type {initiator | mgmt | target}] | tx [traffic-type {initiator | mgmt |
target}] | traffic-type {initiator | mgmt | target}]} |
vsan vsan-id}
no source {filter vsan vsan-id | interface {fc slot/port [rx [traffic-type {initiator | mgmt | target}]
| tx [traffic-type {initiator | mgmt | target}] | traffic-type {initiator | mgmt | target}] |
fcip fcip-id | fv slot/dpp-number/fv-port | iscsi slot/port [rx [traffic-type {initiator | mgmt |
target}] | tx [traffic-type {initiator | mgmt | target}] | traffic-type {initiator | mgmt |
target}]| port-channel channel-number [rx [traffic-type {initiator | mgmt | target}] | tx
[traffic-type {initiator | mgmt | target}] | traffic-type {initiator | mgmt | target}] | sup-fc
number [rx [traffic-type {initiator | mgmt | target}] | tx [traffic-type {initiator | mgmt |
target}] | traffic-type {initiator | mgmt | target}]} | vsan vsan-id}
Configures SPAN session filter.
Specifies the VSAN ID. The range is 1 to 4093.
Specifies the interface type.
(Optional) Specifies the Fibre Channel interface ID at a slot and port on an
MDS 9000 Family switch.
Specifies the FCIP interface ID. The range is 1 to 255.
Specifies a virtual F port (FV port) interface in the specified slot along with
the data path processor (DPP) number and the FV port number.
(Optional) Configures the iSCSI interface in the specified slot/port on an
MDS 9000 Family switch.
(Optional) Configures the Fibre Channel interface on a port on a Cisco Fabric
Switch for HP c-Class BladeSystem or on a Cisco Fabric Switch for IBM
BladeCenter. The range is 0 to 48.
Specifies the PortChannel interface ID. The range is 1 to 128.
Specifies the inband interface, which is 0.
(Optional) Specifies SPAN traffic in ingress direction.
Chapter 21 S Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x