Debug Plog - Cisco MDS 9000 series Command Reference Manual

Chapter 6 Debug Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

debug plog

To enable debugging of persistent logging (PLOG), use the debug plog command in EXEC mode. To
disable a debug command, use the no form of the command or use the no debug all command to turn
off all debugging.
Syntax Description error
trace
Defaults Disabled.
Command Modes
EXEC mode.
Command History Release
3.0(1)
Usage Guidelines None.
Examples The following example displays the system output when the debug plog command is issued:
switch# debug plog
Related Commands Command
no debug all
OL-8413-07, Cisco MDS SAN-OS Release 3.x
debug plog {error | trace}
no debug plog {error | trace}
Enables debugging of PLOG error conditions.
Enables debugging of PLOG events.
Modification
This command was introduced.
Description
Disables all debugging.
Cisco MDS 9000 Family Command Reference
debug plog
6-89