Service Processor Card Assembly - IBM 6000R - Netfinity - 8682 Hardware Maintenance Manual

Service processor card assembly

Before you begin:
• Read "Safety information" on page 196.
• Review the information in "Before you begin" on page
63.
1
Holding screws
2
Service processor card assembly
To remove the service processor card assembly, do the fol-
lowing:
1. Power-off the server, if it is on.
2. Unplug the server.
3. Remove the top cover (see "Removing the server top
cover and bezel" on page 67).
4. Remove the dual fan mount assembly (see "Dual fan
mount assembly with cable" on page 147).
5. Remove the two holding screws.
6. Gently lift the service processor card away from the
system board and out of the server.
148
Netfinity 6000R Type 8682 Models 1RY, 2RY