Four-Fan Housing - IBM 6000R - Netfinity - 8682 Hardware Maintenance Manual

Four-fan housing

Before you begin:
• Read "Safety information" on page 196.
• Review the information in "Before you begin" on page
63.
1
Release latches
2
Fan housing
To remove the four-fan housing, do the following:
1. Power-off the server, if it is on.
2. Unplug the server.
3. Remove the top cover (see "Removing the server top
cover and bezel" on page 67).
4. Remove the four fan assemblies.
5. Remove all adapters from the Active PCI adapter slots.
6. Remove the plastic dividers between the PCI adapter
slots.
7. Press the fan assembly release latches on both sides
of the fan assembly; then, remove the fan assembly
from the server.
146
Netfinity 6000R Type 8682 Models 1RY, 2RY