IBM 6000R - Netfinity - 8682 Hardware Maintenance Manual page 213

• Statement 1
DANGER
Electrical current from power, telephone and communication
cables is hazardous.
To avoid a shock hazard:
• Do not connect or disconnect any cables or per-
form installation, maintenance, or reconfiguration
of this product during an electrical storm.
• Connect all power cords to a properly wired and
grounded electrical outlet.
• Connect to properly wired outlets any equipment
that will be attached to this product.
• When possible, use one hand only to connect or
disconnect signal cables.
• Never turn on any equipment when there is evi-
dence of fire, water, or structural damage.
• Disconnect the attached power cords, telecommu-
nications systems, networks, and modems before
you open the device covers, unless instructed oth-
erwise in the installation and configuration proce-
dures.
• Connect and disconnect cables as described in the
following table when installing, moving, or opening
covers on this product or attached devices.
To Connect
1. Turn everything OFF.
2. First, attach all cables
to devices.
3. Attach signal cables
to connectors.
4. Attach power cords to
outlet.
5. Turn device ON.
• Statement 2
To Disconnect
1. Turn everything OFF.
2. First, remove power
cords from outlet.
3. Remove signal cables
from connectors.
4. Remove all cables from
devices.
Related service information
201