IBM 6000R - Netfinity - 8682 Hardware Maintenance Manual page 78

Use safe practices when lifting.
DANGER: Electrical current from power, telephone, and
communication cables is hazardous. To avoid a shock haz-
ard:
• Do not connect or disconnect any cables or perform
installation, maintenance, or reconfiguration of this
product during an electrical storm.
• Connect all power cords to a properly wired and
grounded electrical outlet.
• Connect to properly wired outlets any equipment that
will be attached to this product.
• When possible, use one hand only to connect or dis-
connect signal cables.
• Never turn on any equipment when there is evidence of
fire, water, or structural damage.
• Disconnect the attached power cords, telecommunica-
tions systems, networks, and modems before you open
the device covers, unless instructed otherwise in the
installation and configuration procedures. Connect and
disconnect cables as described in the following table
when installing, moving, or opening covers on this
product or attached devices.
To connect:
1. Turn everything OFF.
2. First, attach all cables
to devices.
3. Attach signal cables to
connectors.
4. Attach power cords to
outlet.
5. Turn device ON.
CAUTION:
66
Netfinity 6000R Type 8682 Models 1RY, 2RY
To disconnect:
1. Turn everything OFF.
2. First, remove power
cords from outlet.
3. Remove signal cables
from connectors.
4. Remove all cables
from devices.