Network Driver Interface Specification 2.01 (Os/2) Driver - IBM 6000R - Netfinity - 8682 Hardware Maintenance Manual

Hardware maintenance manual
Hide thumbs Also See for 6000R - Netfinity - 8682:
Table of Contents

Advertisement

Table 3. Novell NetWare or IntraNetWare ODI driver
messages for the Ethernet controller
PCNTNW-
NW-180
Network driver interface specification 2.01
(OS/2) driver messages
This section provides explanations of the error messages for
the NDIS 2.01 (OS/2) drivers, and suggested actions to
resolve each problem.
Table 4. NDIS 2.01 (OS/2) driver messages for the Ethernet
controller
PCNTND-1
PCNTND-6
PCNTND-7
PCNTND-8
PCNTND-9
The DMA parameter is not necessary
for PCI device.
Explanation: The Ethernet controller
does not require a DMA setting.
Action: None necessary, message is for
information only.
Unable to open the Protocol Manager.
Explanation: The NDIS stack is not
configured correctly.
Action: Check and correct the
configuration.
Out of memory while allocating
buffers.
Explanation: The driver could not
allocate the requested buffers.
Action: Check the system configuration.
Edit the PROTOCOL.INI file to reduce the
number of Txbuffers and Rxbuffers
specified for the driver.
A Protocol Manager device error
occurred.
Explanation: The NDIS stack is not
configured correctly.
Action: Check and correct the
configuration.
Bad status for the Protocol Manager.
Explanation: The NDIS stack is not
configured correctly in the
PROTOCOL.INI file.
Action: Check and correct the
configuration.
Cannot find the PROTOCOL.INI entry.
Explanation: The NDIS stack is not
configured correctly in the
PROTOCOL.INI file.
Action: Check and correct the
configuration.
Diagnostics
35

Advertisement

Table of Contents
loading

Table of Contents