IBM 6000R - Netfinity - 8682 Hardware Maintenance Manual page 69

1
Flash ROM page swap jumper (J14)
2
Power-on password override jumper (J15)
3
Reserved (J19)
4
Reserved (J3)
Notes:
1. Turn off the server; then, disconnect all power cords
and external cables. before moving any jumpers.
2. Jumpers J19 and J3 are located on the same jumper
block as jumpers J14 and J15 on the system board.
These jumpers are set to
settings on these jumpers.
Attention: If you change the settings on these jump-
ers, the server will fail.
3. See "Changing jumper positions" on page 85 for addi-
tional information on setting jumpers.
Jumper name
J14 Flash ROM
page swap
Table 9. Jumpers J14 and J15 on the system board
Disabled
The default position is a jumper
installed on pins 2 and 3.
See "Recovering BIOS" on page 24
for additional information.
. Do not change the
Description
Installing options
57