IBM 6000R - Netfinity - 8682 Hardware Maintenance Manual page 185

Error
Code/Symptom
184
(Power-on
password
corrupted)
185
(Drive startup
sequence
information
corrupted)
186
(Security hardware
control logic failed)
187
(VPD serial number
not set.)
188
(Bad EEPROM
CRC #2)
189
(Three attempts
were made to
access the server
with invalid
passwords)
201
(Memory test error,
see "Memory
Settings" on page
47.) If the server
does not have the
latest level of BIOS
installed, update
the BIOS to the
latest level and run
the diagnostic
program again.
229
(Cache error)
289
(DIMM has been
disabled by user or
system, see
"Memory Settings"
on page 47.)
301
(Keyboard or
keyboard controller
error)
FRU/Action
1. Run Configuration/Setup
2. System Board
1. Run Configuration/Setup
2. System Board
1. Run Configuration/Setup
2. System Board
1. Set serial number in Setup
2. System Board
1. Run Configuration/Setup
2. System Board
1. Run Configuration/Setup,
enter the administrator
password
2. System Board.
1. Run memory diagnostics.
2. DIMM
3. Memory card
4. System Board
1. Processor
2. Optional Processor (if
installed)
1. Run Configuration/Setup
2. Disabled DIMM
1. Keyboard
2. System Board
Symptom-to-FRU index
173