IBM 6000R - Netfinity - 8682 Hardware Maintenance Manual page 128

• Serial Connection Control
• Service Configuration Manager
• Service Processor Manager
• Service Manager
• Software Inventory
• System Diagnostics Manager
• System Information Tool
• System Monitor
• System Partition Access (requires System Parti-
tion)
• Update Connector Manager (available only on
systems running Windows NT 4.0 or later)
• System Profile
• Web Manager Configuration (installed only if the
Netfinity Manager Installation with Web Enhance-
ment installation configuration is selected)
Note: The graphical user interface (GUI) program files
for DMI Browser, ECC Memory Setup, System
Partition Access, RAID Manager, and Predictive
Failure Analysis will be installed regardless of
whether the system has a DMI Service Layer,
ECC Memory, a System Partition, a RAID
adapter, or a PFA-enabled disk drive. This
enables a network administrator to remotely
access these services on other systems within a
network. However, the installation program
installs the base program that enables local use
of the service only if the required hardware or
system configuration is present.
9. Configure the Network Drivers.
If the installation configuration allows for network
access, enter information regarding the communication
protocols that are supported by the system. The Net-
work Driver Configuration window will appear.
Follow these steps to continue configuring the system:
a. Enter a System Name.
Enter a name for the system in the System Name
field. This name will help other Netfinity Manager
users identify the system on the network.
116
Netfinity 6000R Type 8682 Models 1RY, 2RY