IBM 6000R - Netfinity - 8682 Hardware Maintenance Manual page 115

3. IBM Netfinity 10/100 Fault Tolerant Adapter device driv-
ers
Note: The order of installation is important. You must install
the IBM Netfinity Hot Plug for Windows NT Server 4.0
package before you install the IBM Netfinity 10/100
Fault Tolerant Adapter driver. If you install the
adapter device driver before the PCI Hot Plug Solu-
tion package, the adapter device driver will not recog-
nize the hot-plug code. This happens because the
adapter device driver only checks the NT registry for
the Hot Plug package during installation. If the PCI
Hot Plug Solution package is added after the adapter
device driver is installed, the adapter must be
removed and added again in order for it to detect the
PCI Hot-Plug Solution code.
To install the IBM Netfinity PCI Hotplug for Windows NT 4.0
Failover DMI Agent:
1. Download the IBM Netfinity PCI Hotplug for Windows
NT 4.0 Failover DMI Agent file from the Netfinity Sup-
port web page and extract the files onto a diskette.
2. Insert the diskette into the diskette drive.
3. From the Start menu, select the Run option.
4. Type A:\SETUP.EXE in the Open box.
5. Click Ok. The setup wizard opens.
6. Follow the instructions that are given by the setup wiz-
ard until the program is installed.
7. Restart the server.
To install the IBM Netfinity PCI Hotplug for Windows NT 4.0
Solution package:
1. Download the IBM Netfinity PCI Hotplug for Windows
NT 4.0 Solution file from the Netfinity Support web
page and extract the files onto a diskette.
2. Log on to Windows NT Server as a user in the Adminis-
trator group.
3. Insert the diskette into the diskette drive.
4. From the Start menu, select the Run option.
5. Type A:\SETUP.EXE in the Open box.
6. Click OK. The Setup wizard opens.
7. Follow the instructions given by the setup wizard until
the program is installed.
Windows NT Server failover setup:
To install the IBM Netfinity 10/100 Fault Tolerant Adapter
device drivers:
1. Add the redundant NIC adapter according to the
instructions that are provided with the adapter.
2. Use the ServerGuide CDs to install the AMD PCNet
Ethernet Family adapter device driver.
3. Do not select the Grouping box at this point; you must
first restart the machine.
4. From the Windows NT Server desktop, select Control
Panel, then select the Network icon, then select the
Adapters tab.
Installing options
103