Using Passwords; Power-On Password - IBM 6000R - Netfinity - 8682 Hardware Maintenance Manual

Hardware maintenance manual
Hide thumbs Also See for 6000R - Netfinity - 8682:
Table of Contents

Advertisement

— Hot Swap PCI Slot Power Control
Select this choice to manually force power on to
any of the six Active PCI (hot-plug) slots. This is
used for PCI adapters that do not have the pres-
ence detect pins that the system hot-plug control-
ler uses to turn power on to a slot.
• System Service Processor Settings
Select this choice to view the interrupt-request setting
(IRQ) used by the Advanced System Management Pro-
cessor (system service processor). You can then use
the arrow keys to select a new IRQ setting for the
Advanced System Management Processor from the list
of available choices.
• Event Logs
Select this choice to view or clear error logs.
— Select POST Error Log to view the three most
recent error codes and messages that the system
generated during POST.
Select Clear error logs from the POST Error Log
menu to clear the error log.
— Select System Event/Error Log to view the sys-
tem event/error log. The system event/error log
contains all the system error and warning mes-
sages that the system has generated. You can
use the arrow keys to move between pages in the
system event/error log.
Select Clear error logs from the System
Event/Error Log menu to clear the error or event
log.
• Save Settings
Select this choice to save the customized settings.
• Restore Settings
Select this choice to delete the changes and restore the
previous settings.
• Load Default Settings
Select this choice to cancel the changes and restore
the factory settings.
• Exit Setup
If you have made any changes, the program will prompt
you to save the changes or exit without saving the
changes.

Using passwords

The System Security choice appears only on the full Con-
figuration/Setup Utility menu. After you select this choice,
you can implement two levels of protection: power-on pass-
word and administrator password.

Power-on password

After you set a power-on password, you can enable the
unattended-start mode. This locks the keyboard and
mouse, but allows the server to start the operating system.
48
Netfinity 6000R Type 8682 Models 1RY, 2RY

Advertisement

Table of Contents
loading

Table of Contents