Service Processor Card Assembly - IBM 8682 - Eserver xSeries 350 Hardware Maintenance Manual

Service processor card assembly

Before you begin:
v Read "Safety information" on page 127
v Review the information in "Before you begin" on page 50
To remove the service processor card assembly, do the following:
1. Power-off the server, if it is on.
2. Unplug the server.
3. Remove the top cover (see "Removing the server top cover and bezel" on
4. Remove the dual fan mount assembly (see "Dual fan mount assembly with
5. Remove the two holding screws.
6. Gently lift the service processor card away from the system board and out of
92
IBM xSeries 350 Type 8682: Hardware Maintenance Manual
1
Holding screws
2
Service processor card assembly
page 53).
cable" on page 91).
the server.