Replacing The Battery - IBM 6000R - Netfinity - 8682 Hardware Maintenance Manual

8. When you are asked if you would like to save the cur-
rent code to a diskette, select N.
9. You will be asked to choose which language you wish
to use. Select your language (0-7) and press Enter to
accept your choice. You will be prompted to remove
the diskette and press Enter to restart the system.
Remove the flash diskette from the diskette drive.
Attention: Do not press Enter to reboot the system at
this time.
10. Power-off the server.
11. Move jumper J14 back to pins 2 and 3 to return to nor-
mal startup mode.
12. Restart the server. The system should start up
normally.

Replacing the battery

IBM has designed this product with your safety in mind. The
lithium battery must be handled correctly to avoid possible
danger. If you replace the battery, you must adhere to the
following instructions.
CAUTION:
When replacing the battery, use only IBM Part Number
33F8354 or an equivalent type battery recommended by
the manufacturer. If your system has a module contain-
ing a lithium battery, replace it only with the same mod-
ule type made by the same manufacturer. The battery
contains lithium and can explode if not properly used,
handled, or disposed of.
Do not:
• Throw or immerse into water
• Heat to more than 100 C (212 F)
• Repair or disassemble
Dispose of the battery as required by local ordinances
or regulations.
Note: In the U. S., call 1-800-IBM-4333 for information
about battery disposal.
If you replace the original lithium battery with a heavy-metal
battery or a battery with heavy-metal components, be aware
of the following environmental consideration. Batteries and
accumulators that contain heavy metals must not be dis-
posed of with normal domestic waste. They will be taken
back free of charge by the manufacturer, distributor, or rep-
resentative, to be recycled or disposed of in a proper man-
ner.
Note: After you replace the battery, you must reconfigure
the server and reset the system date and time.
To replace the battery:
1. Read the information in "Before you begin" on page 63.
2. Follow any special handling and installation instructions
supplied with the battery.
Diagnostics
25