Error Symptoms - IBM 6000R - Netfinity - 8682 Hardware Maintenance Manual

Error
Code/Symptom
264-XXX-0NN
(NN = SCSI ID of
failing Tape Drive)
264-XXX-999
(Errors on multiple
tape drives, see
error text for more
info)
301-XXX-000
(Failed Keyboard
test)
405-XXX-000
(Failed Ethernet
test on controller
on the System
Board)
405-XXX-00N
(Failed Ethernet
test on adapter in
PCI slot N)
415-XXX-000
(Failed Modem
test)

Error symptoms

General
CD is not working
properly.
CD-ROM drive tray
is not working.
(The server must be
powered-on.)
166
Netfinity 6000R Type 8682 Models 1RY, 2RY
FRU/Action
1. Tape Cartridge, if user
executed the Read/Write
Tape Drive test (XXX = 256)
2. SCSI or power cable
connected to the tape drive
with SCSI ID NN
3. Tape drive with SCSI ID NN –
refer to Help and Service
Information appendix of tape
drive's User Guide.
4. System Board or SCSI
Controller – run SCSI
Controller diagnostic to
determine of SCSI bus is
functioning properly.
1. See error messages/text in
the PC Doctor error log for
detailed information on each
individual tape drive error.
1. Keyboard
1. Verify that Ethernet is not
disabled in BIOS.
2. System Board
1. Adapter in PCI slot N.
2. System Board
1. Cable
2. Modem
3. System Board
FRU/Action
1. Clean the CD.
2. Run CD-ROM diagnostics.
3. CD-ROM Drive
1. Insert the end of a paper
clip into the manual tray-
release opening.
2. Run CD-ROM diagnostics.
3. CD-ROM Drive