IBM 6000R - Netfinity - 8682 Hardware Maintenance Manual page 85

8. Replace the plastic dividers between the PCI adapter
slots.
9. Reinstall the adapters in the PCI adapter slots.
10. The following illustration shows how to route the SCSI
cable to the ServeRAID adapter.
Attention: When you route the SCSI cable, observe
the following:
• Do not block the ventilated space in front of the
fan assembly.
• Do not place the SCSI cable fold on top of the fan
assembly.
• Do not route the SCSI cable over the memory
board assembly.
DASD
CPU
Memory
NMI
PCI SP Bus
Bus A B C D
Event Log
Power
Non Red
Supply
1 2 3 4
Over Spec
Fan
Temp
11. Install the ServeRAID adapter in the desired PCI slot.
See "Installing a hot-plug adapter" on page 69 for
adapter installation instructions. Refer to the Serv-
eRAID adapter option documentation for additional
information on installing a ServeRAID adapter in the
ServeRAID adapter
Installing options
73