Ethernet Controller Messages; Novell Netware Or Intranetware Server Odi Driver Messages - IBM 6000R - Netfinity - 8682 Hardware Maintenance Manual

Ethernet controller messages

The integrated Ethernet controller might display messages
from the following device drivers:
• Novell™ NetWare™ or IntraNetWare Server ODI
• NDIS Adapter for level 2.01 (OS/2)
• NDIS Adapter for level 4.0 (Windows NT)
• SCO™ UNIX LLI
Novell NetWare or IntraNetWare server ODI
driver messages
This section provides explanations of the error messages for
the Novell NetWare or IntraNetWare server ODI driver, and
suggested actions to resolve each problem.
Table 3. Novell NetWare or IntraNetWare ODI driver
messages for the Ethernet controller
PCNTNW-
NW-026
PCNTNW-
NW-054
PCNTNW-
NW-058
The MSM is unable to parse a required
custom keyword.
Explanation: The user entered an
incorrect parameter keyword.
Action: Reload the driver using the
correct keyword.
The adapter did not respond to the
initialization command.
Explanation: The adapter did not
respond when the driver tried to initialize it.
Action: Verify that the Ethernet controller
is enabled. If the Ethernet controller is
enabled, go to "Starting the diagnostic
programs" on page 17 to run the
diagnostic programs.
The adapter did not respond to the
initialization command.
Explanation: The interrupt request (IRQ)
setting might not be valid or the EEPROM
information might be incorrect.
Action: Make sure the IRQ settings are
correct in the Configuration/Setup Utility
program. for information on setting the
interrupt requests. If the IRQ settings are
correct, go to "Starting the diagnostic
programs" on page 17 to run the
diagnostic programs.
Diagnostics
31