Removing An M320 Console Or Auxiliary Cable; Figure 67: Ethernet Cable Connectors - Juniper M320 Hardware Manual

Copyright © 2010, Juniper Networks, Inc.

Figure 67: Ethernet Cable Connectors

Removing an M320 Console or Auxiliary Cable

To replace a serial cable connected to a management console or auxiliary device, see
Figure 68 on page 146:
Turn off the power to the console or auxiliary device.
1.
Unscrew the screws that secure the cable connector to the port, using a 2.5-mm
2.
flat-blade screwdriver if necessary.
Chapter 13: Replacing the M320 Router Hardware Components
145