CHAPTER 16
Installing and Replacing Components
Replacing an ACX500 or ACX1100 Console or Auxiliary Cable
Removing an ACX500 or ACX1100 Console or Auxiliary Cable
Copyright © 2017, Juniper Networks, Inc.
Replacing an ACX500 or ACX1100 Console or Auxiliary Cable on page 121
Replacing an ACX1000 or ACX1100 Management Ethernet Cable on page 122
Replacing an ACX1000 or ACX1100 Fiber-Optic Cable on page 123
Replacing an ACX1000 or ACX1100 Transceiver on page 125
Removing an ACX500 or ACX1100 Console or Auxiliary Cable on page 121
1.
Installing an ACX1000 or ACX1100 Console or Auxiliary Cable on page 122
2.
To remove a serial cable connected to a console or auxiliary device:
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
1.
ESD points on the chassis.
Press the tab on the connector, and pull the connector straight out of the
2.
CONSOLE/AUX
port.
Figure 29 on page 121
Disconnect the cable from the console or auxiliary device.
3.
Figure 29: Ethernet Cable Connectors
shows the connector.
121