Installing Cage Nuts (If Needed) For M320 Four-Post Racks Or Cabinets; Cabinets; Installing The M320 Router Mounting Hardware; Figure 26: Installing The Mounting Hardware For A Four-Post Rack Or Cabinet - Juniper M320 Hardware Manual

Installing Cage Nuts (If Needed) for M320 Four-Post Racks or Cabinets

Copyright © 2010, Juniper Networks, Inc.
Figure 26: Installing the Mounting Hardware for a Four-Post Rack or
Cabinet
Installing Cage Nuts (If Needed) for M320 Four-Post Racks or Cabinets on page 57
1.
Installing the Large Mounting Shelf for M320 Four-Post Racks or Cabinets on page 58
2.
Installing the Small Mounting Shelf for M320 Four-Post Racks or Cabinets on page 58
3.
Removing the Adjustable Center-Mounting Brackets for M320 Four-Post Racks or
4.
Cabinets on page 58
For racks without threaded holes, you must install cage nuts in the locations specified in
"M320 Mounting Hole Locations for Four-Post Racks or Cabinets" on page 56. To install
the cage nuts:
On the front rack rails, install cage nuts in the holes specified for the large shelf and
1.
the spacer bars.
On the rear rack rails, install cage nuts in the holes specified for the small shelf.
2.
Chapter 5: Installing the M320 Router Mounting Hardware
57