Related
Documentation
Powering On the M320 Router
Copyright © 2010, Juniper Networks, Inc.
Verify that the power cabling is correct, that the power cables do no touch or blocki
11.
access to Routerrouter components, or drape where people could trip on them.
Replace the clear plastic cover over the terminal studs on the faceplate.
12.
Figure 55: Connecting DC Power to the M320 Router
M320 DC Power Supply on page 34
M320 DC Power Electrical Safety Guidelines on page 236
General Electrical Safety Warnings for M Series, MX Series, and T Series Routers on
page 231
Preventing Electrostatic Discharge Damage to an M320 Router on page 214
To power on the router:
Verify that the power supplies are fully inserted in the chassis and that the captive
1.
screws on their faceplates are tightened.
For each power supply on an AC-powered router, verify that the source power cord is
2.
securely inserted into the appliance inlet. For each power supply on a DC-powered
router, verify that the source power cables are connected to the appropriate terminal:
Chapter 9: Providing Power to the M320 Router
99