Installing Cage Nuts (If Needed) For M320 Open Frame Racks; Moving The Adjustable Center-Mounting Brackets For M320 Open-Frame; Racks; Figure 28: Installing The Mounting Hardware For A Center-Mount Open-Frame - Juniper M320 Hardware Manual

Installing Cage Nuts (If Needed) for M320 Open Frame Racks

Copyright © 2010, Juniper Networks, Inc.
Figure 28: Installing the Mounting Hardware for a Center-Mount
Open-Frame Rack
Installing Cage Nuts (If Needed) for M320 Open Frame Racks on page 61
1.
Installing the Large Mounting Shelf for the M320 Open-Frame Racks on page 62
2.
Installing the Small Mounting Shelf for the M320 Open-Frame Racks on page 62
3.
4.

Moving the Adjustable Center-Mounting Brackets for M320 Open-Frame

Racks on page 62
For racks without threaded holes, you must install cage nuts in the locations specified in
"M320 Mounting Hole Locations for Four-Post Racks or Cabinets" on page 56. To install
the cage nuts:
On the front rack rails, install cage nuts in the holes specified for the large shelf.
1.
On the rear rack rails, install cage nuts in the holes specified for the small shelf.
2.
Chapter 5: Installing the M320 Router Mounting Hardware
61