CHAPTER 22
Replacing Chassis Components
Replacing an ACX500 or ACX1100 Console or Auxiliary Cable
Removing an ACX500 or ACX1100 Console or Auxiliary Cable
See Also
Copyright © 2017, Juniper Networks, Inc.
Replacing an ACX500 or ACX1100 Console or Auxiliary Cable on page 113
Replacing an ACX1000 or ACX1100 Management Ethernet Cable on page 114
Replacing an ACX1000 or ACX1100 Fiber-Optic Cable on page 115
Replacing an ACX1000 or ACX1100 Transceiver on page 117
Removing an ACX500 or ACX1100 Console or Auxiliary Cable on page 113
1.
Installing an ACX1000 or ACX1100 Console or Auxiliary Cable on page 114
2.
To remove a serial cable connected to a console or auxiliary device:
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
1.
ESD points on the chassis.
Press the tab on the connector, and pull the connector straight out of the
2.
CONSOLE/AUX
port.
Figure 28 on page 113
Disconnect the cable from the console or auxiliary device.
3.
Figure 28: Ethernet Cable Connectors
Console/Auxiliary Port Connector Pinout on ACX Series Routers on page 73
Installing an ACX1000 or ACX1100 Console or Auxiliary Cable on page 114
shows the connector.
113