Figure 33: Installing The M320 Cable Guards - Juniper M320 Hardware Manual

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Repeat Steps 1 through 3 for the other upper cable guard.
4.
Place one of the lower cable guards over one of the front-mounting flanges of the
5.
chassis, aligning the cable guard with the standoffs on the flange. Each of the two
captive screws on the guard should be aligned with a corresponding hole in the flange.
Tighten each of the two captive screws partway on the cable guard.
6.
Tighten each of the two captive screws completely.
7.
Repeat Steps 5 through 7 for the other lower cable guard.
8.

Figure 33: Installing the M320 Cable Guards

M320 Chassis Lifting Guidelines on page 216
M320 Chassis Description on page 6
M320 Cabinet Size and Clearance Requirements on page 46
Chapter 6: Installing the M320 Router Using a Mechanical Lift
69