Replacing Acx1000 And Acx1100 Hardware Components; Replacing An Acx1000 Or Acx1100 Console Or Auxiliary Cable; Removing An Acx1000 Or Acx1100 Console Or Auxiliary Cable; Figure 26: Ethernet Cable Connectors - Juniper ACX1000 Hardware Manual

CHAPTER 15
Replacing ACX1000 and ACX1100
Hardware Components

Replacing an ACX1000 or ACX1100 Console or Auxiliary Cable

Removing an ACX1000 or ACX1100 Console or Auxiliary Cable

Copyright © 2013, Juniper Networks, Inc.
Replacing an ACX1000 or ACX1100 Console or Auxiliary Cable on page 67
Replacing an ACX1000 or ACX1100 Management Ethernet Cable on page 68
Replacing an ACX1000 or ACX1100 Fiber-Optic Cable on page 69
Replacing an ACX1000 or ACX1100 Transceiver on page 71
Removing an ACX1000 or ACX1100 Console or Auxiliary Cable on page 67
1.
2. Installing an ACX1000 or ACX1100 Console or Auxiliary Cable on page 68
To remove a serial cable connected to a console or auxiliary device:
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect
1.
the strap to one of the ESD points on the chassis.
Press the tab on the connector, and pull the connector straight out of the
2.
port. Figure 26 on page 67
CONSOLE/AUX
Disconnect the cable from the console or auxiliary device.
3.

Figure 26: Ethernet Cable Connectors

shows the connector.
67