Mounting The M320 Chassis Using A Mechanical Lift; Figure 29: Removing An M320 Power Supply Before Installing The Installation; Figure 30: Attaching The M320 Installation Handle - Juniper M320 Hardware Manual

Mounting the M320 Chassis Using a Mechanical Lift

Copyright © 2010, Juniper Networks, Inc.
Figure 29: Removing an M320 Power Supply Before Installing the
Installation Handle

Figure 30: Attaching the M320 Installation Handle

Before installing the chassis in the rack:
Read the safety information in "M320 Chassis Lifting Guidelines" on page 216
Remove the router from the shipping crate as described in "Unpacking the M320 Router"
on page 50.
Install the mounting hardware as described in"Installing the M320 Mounting Hardware
for Open-Frame Racks" on page 60 or "Installing the M320 Mounting Hardware for a
Four-Post Rack or Cabinet" on page 56.
CAUTION: Before front-mounting the router in a rack, have a qualified
technician verify that the rack is strong enough to support the router's weight
and is adequately supported at the installation site.
Chapter 6: Installing the M320 Router Using a Mechanical Lift
65