Verifying Basic Connectivity; Displaying Basic Connectivity Configurations - Juniper J-series Services Router J4350 Getting Started Manual

J2320, J2350, J4350, and J6350 Services Router Getting Started Guide
Table 63: Configuring Basic Settings (continued)
Task
Define the IP address for
ge-0/0/0 .

Verifying Basic Connectivity

To verify that the Services Router has the settings you configured, perform the
following task:

Displaying Basic Connectivity Configurations

Verify the configuration of basic connectivity. Because the basic connectivity settings
Purpose
appear in different places in the configuration hierarchy, displaying the entire
configuration at once makes viewing the settings easier.
From the J-Web interface, select
Action
Configuration>View and Edit>View Configuration Text. Alternatively, from
configuration mode in the CLI, enter the
displays the sample values configured in Table 63 on page 148. Your output displays
the values you set.
150
Verifying Basic Connectivity
J-Web Configuration Editor
1. In the configuration editor hierarchy, next to Interfaces,
click Configure or Edit.
2. In the Interface table, locate the
Unit.
3. In the Unit table, click 0, and in the Family section
next to Inet, click Configure or Edit.
4. To delete the existing IP address, click the Discard
button. Select the Delete Configuration Below This
Point option button from the next display.
5. Next to Address, click Add new entry.
6. In the Source box, type the address and prefix length
for the management interface—for example,
.
192.168.1.1/24
7. Click OK.
Displaying Basic Connectivity Configurations on page 150
[edit]
user@host# show
system {
host-name routera;
domain-name lab.router.net;
domain-search [ lab.router.net router.net ];
backup-router 192.168.2.44;
time-zone America/Los_Angeles;
root-authentication {
ssh-rsa "ssh-rsa AAAAB3Nza...D9Y2gXF9ac==root@routera.lab.router.net";
}
name-server {
10.148.2.32;
CLI Configuration Editor
1.
ge-0/0/0 row and click
2.
command. The following sample output
show
Delete the existing IP address:
delete ge-0/0/0 unit 0 family
inet address .
Set the IP address and prefix
length of . For
ge-0/0/0
example:
set ge-0/0/0 unit 0 family inet
address 192.168.1.1/24