Installing And Connecting A Services Router; Before You Begin - Juniper J2300 Getting Started Manual

Chapter 6
Installing and Connecting a Services
Router

Before You Begin

Make the appropriate preparations and verify the J-series equipment before
installing a J-series Services Router and connecting it to a power source and the
network.
This chapter contains the following topics:
Before You Begin on page 95
Unpacking a J-series Services Router on page 96
Installing the J2300 Services Router on page 97
Installing the J4300 or J6300 Services Router on page 100
Connecting Interface Cables to a Services Router on page 101
Chassis Grounding on page 101
Connecting Power on page 102
Powering a Services Router On and Off on page 109
Before you begin installation, complete the following tasks:
Read the information in "Maintenance and Operational Safety Guidelines
and Warnings" on page 247, with particular attention to "Chassis Lifting
Guidelines" on page 237.
Determine where to install the Services Router, and verify that the rack or
installation site meets the requirements described in "Preparing for Router
Installation" on page 85.
For installation, gather the equipment and tools listed in Table 45.
95
Before You Begin