Omron CJ1W-C113 - REV 02-2008 Operation Manual page 67

Wiring
Outputting Pulse and
Direction Signals
Position Control Unit
(open collector outputs on the
CJ1W-NC113/213/413)
24-VDC
input
Pulse
(CW+CCW)
output
Direction
output
40
In this example, a 5-V DC input motor driver is used for outputting pulse and
direction signals.
24-VDC
power
supply
+
A1/B1
1.6 kΩ
A5/B5
7 to 30 mA
1.6 kΩ
A7/B7
7 to 30 mA
A2/B2
When voltage-level output is used, the level is L for output ON, and H for out-
put OFF.
–
Section 3-5
Motor driver (for 5-VDC input)
Direction input
Pulse input