Omron CJ1W-C113 - REV 02-2008 Operation Manual page 360

Error Code Lists
Group Name
Interrupt feed- Interrupt feeding
ing position error
Interrupt feeding
speed error
Interrupt feeding
acceleration time
error
Interrupt feeding
deceleration time
error
Origin return Origin return
error
Origin return
acceleration time
error
Origin return
deceleration time
error
Present posi- Present position
tion error
JOG JOG speed error 7500
JOG accelera-
tion time error
JOG decelera-
tion time error
Code Cause
7200 The position designation of inter-
rupt feeding is outside the settable
range (–1,073,741,823 to
1,073,741,823 pulses).
7201 The speed designation of interrupt
feeding is outside the settable
range (1 to 500,000 pps).
7202 The acceleration time designation
of interrupt feeding is outside the
settable range (0 to 250 ms).
7203 The deceleration time designation
of interrupt feeding is outside the
settable range (0 to 250 ms).
7300 The speed designation of origin
return is outside the settable range
(1 to 500,000 pps).
7301 The acceleration time designation
of origin return is outside the setta-
ble range (0 to 250 s).
7302 The deceleration time designation
of origin return is outside the setta-
ble range (0 to 250 s).
7400 The position designated with
present position preset is outside
the settable range
(–1,073,741,823 to
1,073,741,823).
The JOG speed is outside the set-
table range (1 to 500,000 pps).
7501 The JOG acceleration time is out-
side the settable range (0 to
250 s).
7502 The JOG deceleration time is out-
side the settable range (0 to
250 s).
Section 11-5
Clearing method Operation after
Execute the com- The current START
mand again after command will not
correcting the posi- be executed, but
tion or speed desig- other operating
nation to a value in axes will not be
the settable range. affected.
error
333