To Restore Trace Commands; To Save Traces - HP 64751 User Manual

To restore trace commands

• Choose File→Load→Trace Spec.
• Using the command line, enter the load trace_spec command.
Trace commands that are restored will always work, even if symbols have been
changed; however, once you modify the trace command, it may no longer work.
Examples To bring back the trace command saved in "tspecfile.TS" and perform a trace
measurement using it:
load trace_spec tspecfile <RETURN>
trace again <RETURN>

To save traces

• Choose File→Store→Trace Data.
• Using the command line, enter the store trace command.
You can save a trace to a trace file and reload it at a later time.
The trace is saved in a file named "trcfile.TR" in the current directory. The
extension ".TR" is appended to trace files if it is not specified in the store trace
command.
Examples
To store the current trace:
store trace trcfile <RETURN>
Chapter 7: Using the Emulation Analyzer
Saving and Restoring Traces
265