HP 64751 User Manual page 138

Chapter 5: Configuring the Emulator
Mapping Memory
Enter the following commands to map memory for the above program.
delete all <RETURN>
0 thru 6fffh emulation rom <RETURN>
7000h thru 16fffh emulation ram <RETURN>
The resulting memory mapper screen is shown below.
To synchronize emulation memory accesses in the range 0 through 6FFFH, you
would enter the following command in place of the command above:
0 thru 6fffh emulation rom dsi <RETURN>
To specify that the range 0 through 6FFFH is in supervisor program space, you
would enter:
0 thru 6fffh supervisor program emulation rom <RETURN>
To exit out of the memory mapper, enter:
end <RETURN>
138