Table of Contents
Advertisement
Chapter 12: Error Messages
Graphical/Softkey Interface Messages - Numbered
Graphical/Softkey Interface Messages - Numbered
These numbered messages can occur because of various problems with the
emulator/analyzer.
10315
Logical emulator name unknown; not found in 64700tab file
Cause: This message may occur while trying to start up the emulator. It indicates
that the emulator name specified could not be found in the 64700tab.net or
/etc/hosts files.
Action: Specify the name in one of these files.
10326
Emulator locked by another user
Cause: This message occurs when you try to start an emulation interface, but your
attempt failed because the emulator is being used by someone else.
Action: The current user must release the emulator.
10327
Cannot lock emulator; failure in obtaining the accessid
Cannot lock emulator; failure in <ERRNO MSG>
10328
Cannot unlock emulator; emulator not locked
Cause: You have issued a command to unlock an emulator that is not locked.
Action: The emulator is available now. You can start the interface.
10328
Cannot unlock emulator; lock file missing
10328
Cannot unlock emulator; semaphore missing
Cause: Lock semaphore missing.
Action: Verify existence and permissions of /usr/hp64000 directory. Cycle
emulator power and use emul700 -u <logical name>.
10328
Cannot unlock emulator; emulator in use by user: <USER NAME>
Cause: The emulator is already in use by the named user.
Action: Current user must release the emulator.
450
Advertisement
Table of Contents
