HP 64751 User Manual page 401

C
Identifies ANSI C as the language so SRU can use the C hierarchy to disambiguate
symbols.
ADA
Identifies ADA as the language so SRU can use the ADA hierarchy to
disambiguate symbols.
C_IEE695 Identifies C_IEEE-695 as the language so SRU can use the C_IEEE-695 hierarchy
to disambiguate symbols.
Note An alternate method for making the langinfo specification is to use the environment
variable, HP64SYMORDER. By making the following entry in your .profile, the
langinfo setting will always be C, for example.
$ HP64SYMORDER=C
$ export HP64SYMORDER
noupdate
When using multiple windows or terminals, and specifying this option, the display
buffer in that window or terminal will not update when a new measurement
completes. Displays showing memory contents are not updated when a command
executes that could have caused the values in memory to change (modify memory,
load, etc.).
number_of_ This allows you to specify the number of source lines displayed for the actual
source_lines
processor instructions to which they correlate. Only source lines up to the previous
actual source line will be displayed. Using this option, you can specify how many
comment lines are displayed preceding the actual source line. The default value is
5.
<NUMSRC> This prompts you for the number of source lines to be displayed. Values in the
range 1 through 50 may be entered.
source
memory_only_
This provides a way to default the memory and trace displays to a setting that HP
trace_on believes is the nicest possible formats for memory and trace displays. Parameters
such as "source on/only", number of source lines to show, display width, and
turning symbols on are all governed by this one selection. With this selection,
memory displays will show the maximum available source lines preceding each
block of code, and trace lists will show five source lines preceding trace data.
Chapter 11: Emulator/Analyzer Interface Commands
# I want to use the C disambiguating
# hierarchy
# let children processes know
# about it
set
401