Exiting Hp 64700 Interfaces; To Close An Interface Window - HP 64751 User Manual

Exiting HP 64700 Interfaces

There are several options available when exiting the HP 764700 interfaces. You
can simply close one of the open interface windows, or you can exit the debug
session by closing all the open windows. When exiting the debug session, you can
lock the emulator so that you can continue later, or you can release the emulation
system so that others may use it. This section describes how to:
•
Close an interface window.
•
Exit a debug/emulation session.

To close an interface window

• In the interface window you wish to close, choose File→Exit→Window. In the
emulator/analyzer interface command line, enter the end command with no options.
All other interface windows remain open, and the emulation session continues,
unless the window closed is the only one open for the emulation session. In that
case, closing the window ends the emulation session, but locks the emulator so that
other users cannot access it.
Chapter 3: Starting and Exiting HP 64700 Interfaces
Exiting HP 64700 Interfaces
71