Table of Contents
Advertisement
FCODE
The function code used to define the address space being referenced. See the syntax
diagram for FCODE to see a list of the function codes available and for an
explanation of those codes.
<FILE>
This represents the absolute file to be loaded into either target system memory,
emulation memory (.X files are assumed), or the trace memory (.TR files are
assumed).
<memory_type>
This indicates the type of memory that you choose for the load operation. The
memory type can be emulation or user memory. You also can load a background
monitor file.
noabort
This option allows you to load a file even if part of the file is located at memory
mapped as "guarded" or "target ROM" (trom).
nosymbols
This option causes the file specified to be loaded without symbols.
noupdate
This option suppresses rebuilding of the symbol data base when you load an
absolute file. If you load an absolute file, end emulation, then modify the file (and
relink it), the symbol database will not be updated upon reentering emulation and
reloading the file. The default is to rebuild the database.
symbols
This option causes the file specified to be loaded with symbols.
trace
This option allows you to load a previously generated trace file.
trace_spec
This option allows you to load a previously generated trace specification.
Note that the current trace specification will be modified, but a new trace will not
be started. To start a trace with the newly loaded trace specification, enter trace
again or specify trace again (not trace). If you specify trace, a new trace will
begin with the default trace specification, not the one you loaded.
Examples
load sort1 <RETURN>
load configuration config3 <RETURN>
load trace trace3 <RETURN>
See Also
The display trace command.
Chapter 11: Emulator/Analyzer Interface Commands
load
375
Advertisement
Table of Contents
