HP 64751 User Manual page 443

Chapter 12: Error Messages
Graphical/Softkey Interface Messages - Unnumbered
Memory block list unreadable
Memory range overflow
Cause: A modify memory command is attempted that would cross physical 0.
Action: Limit the modify memory command to not overflow physical 0 or break
the command into two separate modify commands.
No address label defined
Cause: The address trace label was somehow removed in the terminal interface
using the tlb command.
Action: End session and start again.
No more processes may be attached to this session
Cause: You can operate an emulator in four windows. Each time you start the
emulator in another window, a new process is attached to the current session.
Action: Do not try to use more than four windows. Once you have started the
emulator in four windows, you have reached the maximum number of processes
allowed for that emulator.
Not an absolute file
No absolute file: <file>
No absolute file, No database: <file>
Cause: You tried to load a file into the emulator that is not an executable or
absolute file, so the host system stopped the load process.
Action: Try your command again, and make sure you specify a valid absolute file
name to be loaded.
No symbols loaded
Cause: You tried to step through lines in the source file before symbols are loaded.
Action: Load symbols and try again, or use step with the "source" option (i.e. step
assembly language program).
443