Chapter 5: Configuring the Emulator
Configuring the Emulator Pod
To specify the user memory access size
• Answer the "User memory access size?" question.
When accessing target system memory locations or single-port emulation memory
locations, the access mode specifies the type of microprocessor cycles that are used
to read or write the value(s). For example, when the access mode is byte and a
target system location is modified to contain the value 12345678H, byte
instructions are used to write the byte values 12H, 34H, 56H, and 78H to target
system memory.
Answer "bytes" if the emulator should make 8-bit accesses to target system
memory.
Answer "words" if the emulator should make 16-bit accesses to target system
memory.
Answer "longs" if the emulator should make 32-bit accesses to target system
memory.
149