Table of Contents
Advertisement
Chapter 15: Installation
Installing Hardware
3 Install emulation memory modules on emulator probe. There is a cutout on one side of the memory
modules so that they can only be installed one way.
To install memory modules, place the memory module into the socket groove at an angle. Firmly press
the memory module into the socket to make sure that it is completely seated. Once the memory module
is seated in the connector groove, pull the memory module forward so that the notches on the socket fit
into the holes on the memory module. There are two latches on the sides of the socket that hold the
memory module in place.
529
Advertisement
Table of Contents
