Table of Contents
Advertisement
If the emulation session is continued from a previous session, the listing will
include any previously defined breakpoints. The column marked "status" shows
whether the breakpoint is pending, inactivated, or unknown.
A pending breakpoint causes the processor to enter the emulation monitor upon
execution of that breakpoint. Executed breakpoints are listed as inactivated.
Entries that show an inactive status can be reactivated by executing the modify
software_breakpoints set command.
A label column also may be displayed for addresses that correspond to a symbol.
See the set command for details.
status
This displays the emulator and trace status.
--SYMB--
This option represents the symbol whose children are to be listed. See the
--SYMB-- syntax diagram and the Symbolic Retrieval Utilities User's Guide for
more information on symbol hierarchy and representation.
thru --EXPR--
Allows you to specify a range of addresses for which you want data display.
Typically, you use this to display the contents of an array. You can display both
single-dimensioned and multi-dimensioned arrays. Arrays are displayed in the
order specified by the language definition, typically row major order for most
Algol-like languages.
trace
This displays the current trace list.
<TYPE>
Specifies the format in which to display the information, as shown in the following
table. (Data type information is not available from the symbol database, so you
must specify it.)
Chapter 11: Emulator/Analyzer Interface Commands
display
353
Advertisement
Table of Contents
