The Getting Started Tutorial - HP 64751 User Manual

The Getting Started Tutorial

This tutorial gives you step-by-step instructions on how to perform a few basic
tasks using the emulator/analyzer interface. The tutorial examples presented in this
chapter make the following assumptions:
•
The HP 64751 emulator and HP 64704 analyzer are installed into the
HP 64700 Card Cage, the HP 64700 is connected to the host computer, and the
emulator/analyzer interface software has been installed as outlined in the
"Installation" chapter.
•
The emulator contains at least 256 Kbytes of emulation memory installed in
bank 0 and is plugged into the demo target system.
The Demonstration Program
The demonstration program used in this chapter is a simple environmental control
system. The program controls the temperature and humidity of a room requiring
accurate environmental control.
Chapter 1: Getting Started
31