HP 64751 User Manual page 556

Installing/Updating Emulator Firmware
If you ordered the HP 64751A 68340 emulator probe and the HP 64748C
emulation control card together, the control card contains the correct firmware for
the HP 64751A.
However, if you ordered the HP 64751A and the HP 64748C separately, or if you
are using a HP 64748C that has been used previously with a different emulator
probe, you must download the correct firmware into the emulation control card.
The 68340 emulator firmware is included with the emulator/analyzer interface
software, and the program that downloads emulator firmware is included with the
HP B1471 64700 Operating Environment product.
(The firmware, and the program that downloads it into the control card, are also
included with the 68340 emulator probe on an MS-DOS format floppies. The
floppies are for users that do not have hosted interface software.)
Before you can update emulator firmware, you must have already installed the
emulator into the HP 64700, connected the HP 64700 to a host computer or LAN,
and installed the emulator/analyzer interface and HP B1471 software as described
in the "Installation" chapter.
This chapter describes how to:
•
•
556
Update firmware with the "progflash" command.
Display current firmware version information.