HP 64751 User Manual page 441

Chapter 12: Error Messages
Graphical/Softkey Interface Messages - Unnumbered
Insufficient emulation memory, memory map may be incomplete
Cause: You can map only the amount of emulation memory available in your
emulator. Trying to map additional unavailable memory may cause information to
be missing from your memory map.
Action: Modify your configuration and update the memory map to correctly reflect
the amount of emulation memory available.
Invalid answer in <CONFIGURATION FILENAME> ignored
Cause: You must provide acceptable responses to questions in the configuration file
(file.EA). The emulator ignored the incorrect response. Incorrect responses may
appear in configuration files when you have saved the configuration to a file, edited
it later, and tried reloading it into the emulator. This may also occur if you have
loaded a configuration file that you created while using another emulator, and the
response differs from the response required for this emulator.
Action: Examine your configuration file to check for inappropriate responses to
configuration file questions.
Inverse assembly file <INVERSE ASSEMBLER FILENAME> could not be
loaded
Inverse assembly file <INVERSE ASSEMBLER FILENAME> not found,
<filename>
Inverse assembly not available
Cause: The file does not exist.
Action: Reload your interface and/or real-time operating system software.
Inverse assembly not available
Cause: The inverse assembler for your emulator is missing.
Action: Verify proper software installation.
Joining session already in progress, continue file loaded
Cause: This is a status message. When operating the emulator in multiple
windows, a new emulation session is "joined" to a current session. In this case, the
new session was able to continue because the continue file loaded properly.
441