Chapter 7: Using the Emulation Analyzer
Qualifying Trigger and Store Conditions
To break emulator execution on the analyzer
trigger
• Enter a trigger state specification in the entry buffer; then, choose Trace→Until ().
• Using the command line, use the break_on_trigger option to the trace command.
The break_on_trigger option to the trace command allows you to cause the
emulator to break when the analyzer finds the trigger state.
Note that the actual break may be several cycles after the analyzer trigger.
Examples
To trace before source line 102 and cause the emulator to break into the monitor
when the analyzer triggers:
trace before address main."main.c": line 102
break_on_trigger <RETURN>
244