HP 64751 User Manual page 131

To assemble and link the monitor program, enter the following commands
(which assume that /usr/hp64000/bin is defined in the PATH environment
variable):
$ as68k -L fm64751.s > fm64751.lis <RETURN>
$ ld68k -c fm64751.k -L > fm64751.map <RETURN>
Where the "fm64751.k" linker command file is:
name fm64751
load fm64751.o
end
To configure the emulator to use a foreground monitor program, access the
configuration questions, and answer the questions as shown below.
Modify memory configuration? yes
Monitor type? user_foreground
Reset map (change of monitor type requires map reset)? yes
Monitor file name? fm64751
Monitor's base address? 20000h
Re-map memory for the demo program by entering the following mapper
commands:
0 thru 6fffh emulation rom <RETURN>
7000h thru 16fffh emulation ram <RETURN>
end <RETURN>
Modify emulator pod configuration? yes
Reset value for Supervisor Stack Pointer? 13000h
Reset value for Program Counter? 400h
Configuration file name? fmoncfg
To load the demo program absolute file, enter the following command using the
command line:
load ecs.x <RETURN>
Chapter 5: Configuring the Emulator
Selecting the Emulation Monitor
131